The fastest, easiest for using, most modern and accurate system to detect gold, and the coins under the ground. GOLD SEEKER device works by two systems to determine between the precious and non-precious metals. It has been added the feature of ground induction to this device, which is capable of generating (Eddy Current) (transmitter and receiver). When the device is working, it sends a signal to the search coil (Double D Coil) which, in turn, generates a spiral current signal (Eddy Current). This will create spiral waves amplifies to more than 1000 pules per second to assist the device to cover greater depths as well as analyze the signal from the target to determine if the metal detected is precious or non-precious. A unique feature of this device is its ability to calibrate with the ground to ensure that it is not affected by any signals resulting from moisture in the soil, mineral rocks or land containing mineral salts or solid ground.
Video of the GOLD SEEKER device, gold detector and precious metals in the ground
After the ground balance process and sensitivity setting are adjusted, you can start searching by lifting the search coil 2cm above the ground and sweeping it right and left, keeping it parallel to the ground.
When a precious metal signal is picked up, the device will make a continuous beep sound and the green indicator comes on.
If the signal is for a non-precious metal detected, the device will be make an intermittent sound and the red indicator comes on
If the signal from the detected target is weak, press the tune button to increase the sensing range of the coil to reach greater depths, and confirm the target.
To avoid missing small and deep targets, sweep the search coil from right to left and left to right over each area you are scanning.
To make sure the target type is precious or non-precious, hover the coil slowly over the target.
To make sure the target type is precious or non-precious, stop the coil above the target while keeping it above the ground a 2-cm distance.
|Bag dimensions||810mm x 325mm x 200mm|
|Bag weight (empty)||3900 g|
|Battery Capacity||Li-ion 54 Wh|
|Battery Operating Temperature||0 ° C to 60 ° C|
|Battery Output Voltage||Li-ion 10.8 VDC|
|Battery Run Time||12Hours|
|Battery Storage Temperature||- 2C° to 70C°|
|Battery Type||Li-ion Rechargeable Battery - External Battery|
|Battery weight||500 g|
|Charger Input Voltage||90 → 250 VAC 50→60 Hz|
|Charger Operating Temperature||0 ° C to 50 ° C|
|Charger Output||12.6 VDC / 1000 mA|
|Charger Storage Temperature||- 30C° to 80C°|
|Coil||GER 30 Ø: 30 cm - GER 15 Ø: 15 cm|
|Data processing speed||16 MHz|
|Device weight||2000 g|
|Frequency||Max 500 KHz|
|Length||Device (opened): 1513mm - Device (closed): 820 mm|
|Operating Humidity||up to 95 % non-condensing|
|Operating Temperature||0 ° C to 70 ° C|
|Operating Time (54 W Battery)||12 Hours|
|Storage Humidity||up to 98 % Relative Humidity|
|Storage Temperature||- 20C° to 70C°|
|Waterproof Rating - Detector||not waterproof (weatherproof only)|
|Waterproof Rating -Coil||waterproof to a depth of (30 cm)|
|weight total||6800 g|
Ensure that all parts are included with a device
Be free to contact us
We are happy to communicate with us
Or send your inquiry by writing your question in the previous form
GER Detect provides better detection and exploration devices gold detector ,Precious metal detector, Groundwater detector,All devices made in Germany.